RayComposer NET
RayComposer NET is our laser show DAC with Ethernet LAN and USB interface. It translate the digital data sent over the network into analog voltages to control a laser projector.
Ethernet LAN enables you to use much longer cable runs without problems caused by analog signal loss or distortion. Ethernet signals can be distributed easily with network switches. So instead of pulling a long ILDA cable for each laser projector from your control computer to the stage, you can use a single Ethernet cable and then use network switches on stage to distribute the signal. The "last mile" the analog signal needs to travel can be made rather short - we ship a 50cm black ILDA cable with the device.
Ready for the Internet of Things
RayComposer NET supports IPv6, the newest version of the internet protocol, which currently sees increasing adoption on the internet, because IPv4 address space is exhausted and no more addresses can be assigned. The limited address range of IPv4 (currently) is not an issue when addressing laser projectors in a LAN. More interestingly, IPv6 adds a new addressing mode which allows device in the LAN to directly communicated with each without any prior setup. This allows us to bring true Plug&Play functionality, as known from our USB device, to our LAN device as well. Most users will never have to think about IP address at all.
IPv4 is of course supported as well and can be used with automatic configuration by DHCP or AutoIP as well as manual configuration.
Flexible Powering Options
RayComposer NET can source its power from the LAN interface as well. To accomplish this RayComposer NET is fully compliant to the Power-Over-Ethernet specification 802.3af and can therefore be used with all PoE-capable network switches or power injectors. This will free you from the need to place wall-wart power supplies at awkward locations, like on a tripod or between trussing next to your laser projector.
The USB port can be used as well to power the device - directly from a Laptop or a USB power supply.
USB High Speed
Additional to the LAN interface RayComposer NET alsow has a USB high speed interface with 480 MB/s data transfer rate. Data can be transferred over this interface even faster then over LAN. The USB interface can be used on Windows, Mac OS and Linux without prior driver installation. All functions available on the LAN interface can also be used over USB.
Web Interface for Easy Configuration
RayComposer NET offers a responsive Web Interface, that can be used from mobile device like the iPohne as well , to configure device settings or to display the current system state. This is much more convenient then making settings directly at the device, which, on the job, is often mounted in hardly accessible locations.
Laser Entertainment without Computer
RayComposer NET can also be used without a controlling computer. It is equipped with a microSD card socket to play laser show files. Playback can be controlled locally, through DMX, ArtNET, sACN, or OSC.
DMX-512 Input & Output
RayComposer NET also acts as a DMX interface. It can received DMX signals as well as send DMX.
RayComposer NET implements the common ArtNET protocol as well as the newly standardized sACN protocol for sending and receiving DMX over LAN.
Technical Data at a glance:
Projector Interface: ILDA Standard Projector Interface
Resolution XY: 16 Bit (65536 x 65536 Bildpunkte)
Color Channels: 6 Channels with 12 Bit High Dynamic Range, ISP Signals: Red, Green, Blue, Intensity/Yellow, Cyan, Magenta
Sampling Rate: 1 - 200000 Hz
Maximum Frame Size (Points): 4 Billion.
Shutter: actively controlled Shutter Signal
LAN Interface: 802.3u 10/100MBps Ethernet with Auto-MDIX
USB Interface: USB 2.0 High-Speed (480 MBps), compatible to USB 1 and USB 3 Ports as well
Processor: 300MHz floating point DSP
Memory: micro SD memory socket, UHS-1 capable; 4GB memory card included
DMX512-Input, RDM-capable (using Adapter)
DMX512-Output, RDM-capable (using Adapter)
Driver: Windows, Linux, Mac OS; open API, compatible with third party software as well
Power Supply: über den USB Bus
Dimensions: 93 x 69 x 24mm
USB cable: included
ILDA cable: 50cm black ILDA cable included
Made in Germany
Buy Online
For Price and Availability visit our Shop.